Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA WINE STORAGE CABINET
Page 3 of 4
Made in Indonesia - r03
5 Fit right side panel onto dowels of the wine and stem
racks, and the back panel. Loosely attach bottom wine
rack with 2 medium screws and top of back panel with 1
medium screw. Do not fully tighten screws.
6 Remove drawer from top assembly by first unscrewing
the drawer stop located on the underside of the top.
Place the drawer aside.
7 A. With the assistance of another adult, carefully place
assembly upright. Fit top assembly into position as
shown.
B. Insert 3 long screws at the rear of the top assembly
as shown and fasten with the phillips head screwdriver.
A
8 A. Secure the side panels from the inside with 4 small
screws.
B. At this point fully tighten all screws from Steps 3-8
with the phillips head screwdriver. Do not over tighten
the screws.
B