Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Havana Wine Storage Cabinet

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing the Havana Wine Storage

Cabinet. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - left side

frame

1 - right side

frame

1 - top assembly

1 - bottom wine rack

3 - wine racks

TOOLS REQUIRED

Phillips head screwdriver (included)

HAVANA WINE STORAGE CABINET

Page 1 of 4

Made in Indonesia - r03

Missing hardware? Please call 800.606.6387 for replacements.

8 - medium screws3 - long screws 4 - short screws

3 - large

wood dowels

16 - small

wood dowels

1 - back panel

1 - stem rack

Summary of content (4 pages)

PAGE 1
HAVANA WINE STORAGE CABINET HARDWARE 3 - long screws Thank you for purchasing the Havana Wine Storage Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
HAVANA WINE STORAGE CABINET x3 B A A B 1 A. Insert 1 large wood dowel in the right and left side frames as shown. B. Insert 1 large wood dowel into top of back panel. 3 Fit back panel into slot at rear of left side frame as shown. Loosely attach with 2 medium screws. Do not fully tighten the screws. 2 A. Insert 4 small wood dowels into the ends of each of the 3 wine racks. B. Insert 4 small wood dowels into the stem rack.
PAGE 3
HAVANA WINE STORAGE CABINET 5 Fit right side panel onto dowels of the wine and stem racks, and the back panel. Loosely attach bottom wine rack with 2 medium screws and top of back panel with 1 medium screw. Do not fully tighten screws. 6 Remove drawer from top assembly by first unscrewing the drawer stop located on the underside of the top. Place the drawer aside. B A 7 A. With the assistance of another adult, carefully place assembly upright. Fit top assembly into position as shown. B.
PAGE 4
HAVANA WINE STORAGE CABINET 9 Fit drawer assembly into case, aligning grooves on drawer sides with rails in case interior. 10 Pull drawer out half way and insert drawer stop into threaded hole on the underside of the top. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.