Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Indonesia R02 Page 1 of 2
1 A) With the assistance of another adult, carefully place
tabletop face down onto a clean, padded surface. Detach
pre-attached hex nuts and washers from each leg, using a
hex wrench if necessary. Set hardware aside until further
instructions. Insert 4 legs into tabletop by aligning
corresponding holes and pre-installed bolts located on
legs.
B) Loosely attach with 2 hex nuts and 2 washers per leg.
Do not fully tighten until completely assembled.
Thank you for purchasing the Havana High Dining Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HAVANA HIGH DINING TABLE
Missing hardware? Please call
800.606.6387 for replacements.
8 - hex
nuts
8- washers
4 - bolts
A
B
B
1 - tabletop
Hex wrench (included)
Phillips head screwdriver
4 - legs
(hex bolts and washers attached
to pre-installed bolts on each leg)
1 - stretcher
Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (2 pages)