Assembly Instruction
Made in China - r05 Page 2 of 2
GRAHM CONSOLE TABLE
NOTE: Make sure drawer
components of tabletop
are securely held
together when transporting
tabletop.
2 Fit crossbar assembly into notches of leg assembly.
Secure crossbar assembly to assembled unit with 1 screw
per leg, using a phillips head screwdriver. Fully tighten all
bolts with an allen wrench.
1 With the assistance of another adult, carefully place
tabletop upside down onto clean, padded surface.
Make sure drawer components of tabletop are
securely held together when transporting the tabletop.
Loosely attach 4 legs into tabletop with 2 bolts and 2
flat washers per leg as shown. Do not fully tighten
until further instructions.
3 With assistance of another adult, carefully position
unit upright. Attach 3 pulls to assembled unit with 2
pull screws per pull as shown. Secure screws with a
screwdriver.
Assembly is now complete.
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.