Assembly Instruction

A
B
Made in China - r05 Page 2 of 2
GRAHM COFFEE TABLE
2 Fit crossbar assembly into notches of leg assembly.
Secure crossbar assembly to assembled unit with 1 screw
per leg, using a phillips head screwdriver. Fully tighten all
bolts with an allen wrench.
3 A) With the assistance of another adult, carefully
position unit upright. Carefully open top
compartments of tabletop as shown.
B) Insert 3 dividers into grooves of tabletop as shown.
C) Place folding top into tabletop as shown.
A
B
1 With the assistance of another adult, carefully place
tabletop upside down onto clean, padded surface.
Make sure loose components are securely held together
when transporting the tabletop. Loosely attach 4 legs
into tabletop with 2 bolts and 2 flat washers per leg as
shown. Do not fully tighten until further instructions.
Make sure arrows
on each cam
points toward
nearest edge with
holes.
allen
bolt
flat
washer
4 Attach 4 pulls to assembled unit with 2 pull screws per
pull as shown. Secure screws with a screwdriver.
Carefully close top compartments of tabletop.
Assembly is now complete.
C
B
NOTE: Make sure loose
components are securely
held together when
transporting the tabletop.
tabletop
right
back leg
folding
top
dividers
tabletop
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
right
front
leg
back
legs
front
legs