Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Page 2 of 2
GIO 24" & 30" BARSTOOLS
Made in Italy
2 Place leg frame upside down. Insert 4 feet in tube
ends, gently tapping with hammer if necessary.
3 A. Loosely attach leg frame to seat bottom using 3 allen
screws. Do not fully tighten.
B. Stand the chair upright and make sure the seat is properly
aligned with the leg frame. Make any necessary adjustments.
CLEANING AND CARE
Clean seat with a dry, soft cloth. Do not use abrasive
cleaners. Frame may be cleaned with a damp cloth.
Periodically re-tighten the allen screws.
x 3
A
B
4 Turn stool back over and fully tighten all allen screws
using the allen wrench provided.
5 Slide all 4 leg mounts away from the center and out
towards the legs until they can no longer be moved.
Assembly is now complete.