Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
4 Position seat panel over corresponding holes in the
case assembly. Attach with 4 long machine screws, 4
split washers and 4 flat washers. Secure all screws with
a phillips head screwdriver.
Page 2 of 3
Made in China - r06
5 A. Attach top cap to top of the back panel with 3 long
pan head screws. Fully tighten with a phillips head
screwdriver.
B. Attach 5 coat hooks to the back panel with 2 flat head
screws per hook. Secure each screw with a screwdriver.
2 Fit dowels of divider into corresponding holes of the
shelf as shown. Secure from below with 2 short pan
head screws. Fully tighten each screw with a phillips
head screwdriver. Do not over tighten the screws
x 2
3 Position shelf assembly as shown and fit into side frame
assembly.
x 4
A
B
GENEVA HALLWAY ORGANIZER
x 5
NOTE:
Do not over
tighten the screws.
View from below