Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Geneva White Hallway Organizer

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 Fit dowels of 2 side panels into corresponding holes in

front frame as shown and fit into position. Attach each side

panel with 2 short machine screws, 2 split washers and 2

flat washers. Secure each with a phillips head screwdriver.

Thank you for purchasing the Geneva Hallway

Organizer. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - shelf

1 - top cap

TOOLS REQUIRED

Phillips head screwdriver

1 - front

frame

1 - divider

2 - side

panels

1 - back panel

1 - seat

panel

GENEVA HALLWAY ORGANIZER

Page 1 of 3

Made in China - r06

Missing hardware? Please call 800.606.6387 for

replacements.

3 - long pan

head screws

4 - long

machine screws

16 - flat

washers

5 - coat

hooks

16 - split

washers

2 - short pan

head screws

10 - flat

head screws

12 - short

machine screws

x 4

Summary of content (3 pages)

PAGE 1
GENEVA HALLWAY ORGANIZER HARDWARE Thank you for purchasing the Geneva Hallway Organizer. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
GENEVA HALLWAY ORGANIZER NOTE: Do not over tighten the screws. x2 2 Fit dowels of divider into corresponding holes of the shelf as shown. Secure from below with 2 short pan head screws. Fully tighten each screw with a phillips head screwdriver. Do not over tighten the screws 3 Position shelf assembly as shown and fit into side frame assembly. x5 A B x4 View from below 4 Position seat panel over corresponding holes in the case assembly.
PAGE 3
GENEVA HALLWAY ORGANIZER x4 x4 6 With the assistance of another adult, fit seat assembly onto back panel as shown. Insert 4 short machine screws, 4 split washers and 4 flat washers through holes in the side panels and into the back panel. Fully tighten with a screwdriver. 7 Locate 4 holes at the top rear of the seat assembly. Insert 4 short machine screws, 4 split washers and 4 flat washers into each hole and secure with a screwdriver. Assembly is now complete.