Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Page 3 of 3
Made in China - r06
6 With the assistance of another adult, fit seat
assembly onto back panel as shown. Insert 4 short
machine screws, 4 split washers and 4 flat washers
through holes in the side panels and into the back
panel. Fully tighten with a screwdriver.
x 4
7 Locate 4 holes at the top rear of the seat assembly. Insert
4 short machine screws, 4 split washers and 4 flat washers
into each hole and secure with a screwdriver.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
GENEVA HALLWAY ORGANIZER
x 4