Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
GAZEBO 28" ROUND TABLE
HARDWARE
Made in China R01 Page 1 of 1
Thank you for purchasing the Gazebo 28" Round Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: Two people are required to assemble this
product safely.
1 - table top
TOOLS REQUIRED
1 - Allen wrench (included)
4 - bolts
COMPONENTS
1 - leg
frame A
1 Fit slot of leg frame A into slot of leg frame B.
1 - leg
frame B
Leg Frame A
Leg Frame B
2 With the assistance of another adult, place the table top
upside down on a non-abrasive surface. Position holes in
legs over corresponding holes in table top. Secure legs to
table top with 1 bolt per leg using the allen wrench provided.
NOTE: Tighten each bolt a few revolutions at a time, applying
equal pressure to all bolt joints. Repeat until all bolts are tight.
Do not over-tighten. Over-tightening may strip bolts.
Assembly is now complete.
Missing hardware? Please call 800.606.6387
for replacements.
CARE & CLEANING
Use mild soap and water to clean the table top & base. Do
not use abrasive cleaners or materials. For stain protection of
the table top, use a sealer designed for clay products.