Assembly Instruction

GALERIE SPIRITS CABINET
Made in China - r14 Page 2 of 3Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
B
A
1
A) Insert 2 wood dowels into each cabinet as shown.
With the assistance of another adult, fit holes of top
panel into corresponding dowels of each cabinet as
shown.
B) Attach top panel with 2 bolts and 2 flat washers
from the inside of each cabinet as shown. Secure bolts
with the allen wrench.
A
B
NOTE:
Do not over
tighten the bolts
B
2
With assistance of another adult, carefully turn over unit.
Insert back panel into corresponding grooves of each
cabinet as shown.
3
A) Insert 2 wood dowels into bottom of each cabinet
as shown.
B) Fit holes of base panel into corresponding dowels
of cabinets as shown. Attach with 8 bolts and flat
washers as shown.
B
A
B
A
top
panel
left
cabinet
back
panel
NOTE: Top panel is made up of
sliding panels, use caution when
moving into position.
4
A) With the assistance of another adult, carefully
position unit upright. Attach 1 pull to each door with 1
screw as shown. Secure screws with a phillips head
screwdriver.
B) Insert 8 shelf pins at desired shelf height as shown.
Turn each pin clockwise to secure.
right
cabinet