Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
5 Fully tighten all 8 short bolts with the allen wrench.
With the assistance of another adult, lift assembled unit
into an upright position. Assembly is now complete.
3 Attach remaining 2 legs as shown, fitting leg slots into
corresponding slots in shelves. Loosely attach each leg to
top with 2 short bolts. Do not fully tighten the bolts.
4 With the assistance of another adult, turn table
assembly upside down. Attach 1 bracket at each leg
and bottom shelf intersection. Secure each with 2 long
bolts and 2 washers. Fully tighten with the allen
wrench.
CARE & CLEANING
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
GALERIE SIDE TABLE
Page 2 of 2
Made in China - r04
x 8
2 Turn top assembly on its side. Fit slots of middle shelf
and bottom shelf into corresponding slots on legs as
shown.
x 4