Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
3 Attach left leg as shown, fitting leg slots into
corresponding slots in shelves. Loosely attach to top with
2 short bolts. Do not fully tighten the bolts.
2 With the assistance of another adult, turn top assembly
on its side. Fit slots of middle shelf and bottom shelf into
corresponding slots on legs as shown.
CARE & CLEANING
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
GALERIE CONSOLE
Page 2 of 2
Made in China - r04
4 With the assistance of another adult, turn table
assembly upside down. Attach 1 bracket at each leg and
bottom shelf intersection. Secure each with 2 long bolts
and 2 washers. Fully tighten with the allen wrench.
5 Fully tighten all 6 short bolts with the allen wrench.
With the assistance of another adult, lift assembled unit
into an upright position. Assembly is now complete.
x 6