Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

Thank you for purchasing the Galerie Console. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - middle shelf

GALERIE CONSOLE

Page 1 of 2

Made in China - r04

1 - left

leg

1 - middle

leg

1 Place top face down on a padded surface. Loosely attach

right leg with 2 short bolts and middle leg with 2 short

bolts. Make sure holes and slots on each leg face inwards.

Do not fully tighten the bolts.

1 - top

1 - bottom shelf

1 - right

leg

TOOLS REQUIRED

Allen wrench (included)

Missing hardware? Please call

800.606.6387 for replacements.

HARDWARE

12 - long bolts 12 - washers6 - short bolts

6 - brackets

PAGE 1
GALERIE CONSOLE HARDWARE 6 - short bolts 12 - long bolts 6 - brackets Thank you for purchasing the Galerie Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 12 - washers Missing hardware? Please call 800.606.
PAGE 2
GALERIE CONSOLE 2 With the assistance of another adult, turn top assembly on its side. Fit slots of middle shelf and bottom shelf into corresponding slots on legs as shown. 3 Attach left leg as shown, fitting leg slots into corresponding slots in shelves. Loosely attach to top with 2 short bolts. Do not fully tighten the bolts. x6 4 With the assistance of another adult, turn table assembly upside down. Attach 1 bracket at each leg and bottom shelf intersection.