Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Thailand - r03 Page 1 of 1
1 With the assistance of another adult, place tabletop
onto clean, padded surface as shown. Attach 4 legs to
tabletop with 2 spring washers, 2 flat washers and 2
bolts per leg as shown. Secure, but do not over tighten
the bolts, using an allen wrench. Carefully place table
upright.
Assembly is now complete.
Thank you for purchasing the Form Square or Rectan-
gular Table. This page lists all the contents included in
the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
FORM SQUARE OR RECTANGULAR TABLE
8 - bolts
4 - legs
leg
NOTE: Do not over
tighten the bolts
8 - flat
washers
8 - spring
washers
tabletop
1 - tabletop
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Periodically tighten bolts as necessary.
It is recommendedto use coasters to protect surface from
heat and water.
ASSEMBLY
Missing hardware? Please call
800.606.6387 for replacements.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
allen wrench
(included)