Assembly Instruction

Made in Thailand - r02
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
FORM CHAIR
Page 2 of 2
3 Attach seat to assembled unit with 2 brackets. Secure
each bracket with 2 screws as shown, using a phillips
head screwdriver. Make sure to attach bracket where
pre-drilled holes are on left and right side rails. Do not over
tighten the screws. Position assembled unit upright.
Assembly is now complete.
NOTE: Do not over
tighten the screws
NOTE: Make sure to attach
brackets at pre-drilled holes
are on left and right side rails.
2 Fit pre-assembled dowels of left and right side rails
into corresponding holes of front leg frame. Secure
front leg frame to left and right side rails with 2 flat
washers, 2 spring washers and 2 bolts per side as
shown.
front leg
frame
seat
bracket
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Periodically
tighten bolts as necessary.