Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand - r02 Page 1 of 2

1 Place back frame onto a clean, padded surface. Fit

pre-assembled dowels of left and right side rails into

corresponding holes of back frame. Secure left and

right side rails to back frame with 2 flat washers, 2

spring washers and 2 bolts per rail as shown, using an

allen wrench. Do not over tighten the bolts.

Thank you for purchasing the Form Chair. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

FORM CHAIR

8 - bolts

4 - screws

1 - front leg

frame

1 - seat

2 - side rails

(1 left, 1 right)

1 - back frame

back frame

left side

rail

8 - spring

washers

8 - flat

washers

2 - brackets

right side

rail

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

allen wrench

(included)

phillips head screwdriver

PAGE 1
FORM CHAIR HARDWARE 8 - bolts 4 - screws 8 - spring washers 8 - flat 2 - brackets washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Form Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
FORM CHAIR NOTE: Do not over tighten the screws front leg frame bracket seat 2 Fit pre-assembled dowels of left and right side rails into corresponding holes of front leg frame. Secure front leg frame to left and right side rails with 2 flat washers, 2 spring washers and 2 bolts per side as shown. NOTE: Make sure to attach brackets at pre-drilled holes are on left and right side rails. 3 Attach seat to assembled unit with 2 brackets.