Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
3 Determine if you want to use standard or legal size
hanging files. Hook ends of file support onto bottom
drawer sides as shown for desired file size.
Assembly is now complete.
Thank you for purchasing the
Flex Rolling File. This page
lists all the contents included in
the box. Please take time to
identify the hardware as well as
the individual components of
this product. As you unpack
and prepare for assembly, place
the contents on a carpeted or
padded area to protect them
from damage.
COMPONENTS
1 - drawer
case
2 - casters
2 - locking casters
TOOLS REQUIRED
Hex wrench (included) Phillips head screwdriver
1 - file support 3 - drawer pulls
x 3
FLEX ROLLING FILE
Page 1 of 1
Made in Taiwan - r03
2 Attach 2 locking casters to the front of the assembled
unit, and 2 casters to the back of the assembled unit. Use
the hex wrench to secure the wheels, turning each counter-
clockwise to tighten.
Missing hardware? Please call 800.606.6387 for
replacements.
6 - screws 6 - rubber bumpons
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.
1 A. Fasten 1 drawer pull to each drawer with 2 screws.
Fully tighten screws with a phillips head screwdriver.
B. Attach 2 rubber bumpons to the inside of each drawer
front as shown.
Standard File Size
Legal File Size