Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
FIORI 48" ROUND TABLE
HARDWARE
Made in China 2004 Page 1 of 2
Thank you for purchasing the Fiori 48" Round Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: Two people are required to assemble this
product safely.
1 - table top
TOOLS REQUIRED
1 - Allen wrench (included)
4 - long bolts
1 - short bolt
COMPONENTS
1 - leg
frame A
1 Fit leg frame A into notch of leg frame B.
1 - leg
frame B
Leg Frame A
Leg Frame B
2 With the assistance of another adult, place the table top
upside down on a non-abrasive surface. Position holes in
legs over corresponding holes in table top. Secure legs to
table top with 1 long bolt per leg using the allen wrench
provided.
NOTE: Tighten each bolt a few revolutions at a time, applying
equal pressure to all bolt joints. Repeat until all bolts are tight.
Do not over-tighten. Over-tightening may strip bolts.
Missing hardware?
Please call
800.606.6387 for
replacements.

Summary of content (2 pages)