Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
ASSEMBLY
1 - seat
1 - bottom
leg frame
allen wrench (included)
1 - top
leg frame
Made in China - r04 Page 1 of 1
Thank you for purchasing the Felix Chair. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
FELIX CHAIR
Missing hardware? Please call 800.606.6387 for replacements.
4 - caps
1 - center
bolt
4 - large
bolts
5 - spring
washers
4 - plastic
spacers
A) Slide 2 plastic spacers onto
each leg frame as shown.
B) Place seat upside down onto a clean,
padded surface as shown. Align spacers of
top leg frame with corresponding metal discs
of seat as shown. Loosely attach top leg
frame with 2 large bolts and 2 spring
washers as shown.
top and
bottom
leg frame
metal
disc
large bolt
plastic
spacer
top leg
frame
A B
spring washer
plastic
spacer
NOTE: Arrow indicates
the front of each leg frame.
NOTE: Make sure
the large hole of
each plastic spacer
is facing upwards.
C) Align spacers of bottom leg frame with
corresponding discs of seat as shown.
Loosely attach bottom leg frame with 2
large bolts and 2 spring washers. Loosely
secure top and bottom leg frame with 1
center bolt and 1 spring washer. Center
bolt must be installed to secure leg
assembly. At this point, fully tighten all bolts
with the allen wrench. Cover large bolts
with caps. Position unit upright.
Assembly is now complete.
center
bolt
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
C
bottom leg
frame
top leg
frame
spring
washer
NOTE: Bolts should be
periodically tightened
cap
IMPORTANT: Center bolt
must be installed to secure
leg assembly
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com