Assembly Instruction

Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
A
B
1
2
3
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
A
C
C
B
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
FARROW MEDIA GAMING TOWER
Made in Vietnam - r02 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the
door hinges.
9 Attach hinges of door to left side panel as shown.
Secure each hinge with 2 small screws, using a
screwdriver.
door
10 A) Insert 8 shelf pins at desired shelf heights.
B) Place top and bottom adjustable shelves into assem-
bly as shown. Make sure that each shelf is securely
supported by each shelf pin.
Assembly is now complete.
B
top
adjustable
shelf
A
bottom
adjustable
shelf
B
A