Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Farrow Entryway Cabinet

COMPONENTS

Made in Vietnam - r03 Page 1 of 4

Thank you for purchasing the Farrow Entryway Cabinet.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

FARROW ENTRYWAY CABINET

1 - partition

1 - top panel 1 - front frame

4 - adjustable

shelves

1 - back panel

2 - side panels

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

22 - spring

washers

14 - small

flat washers

16 - shelf

pins

phillips head screwdriver

1 - bottom

panel

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

(We recommened the use of hand tools instead power tools)

allen wrench (included)

WALL MOUNTING HARDWARE

4 - legs

8 - large

flat washers

16 - small

screws

14 - small

bolts

6 - large

screws

8 - large

bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
FARROW ENTRYWAY CABINET ASSEMBLY HARDWARE 22 - spring washers 16 - small screws Missing hardware? Please call 800.606.6387 for replacements. 14 - small flat washers 6 - large screws 8 - large flat washers 16 - shelf pins 14 - small bolts 8 - large bolts WALL MOUNTING HARDWARE Thank you for purchasing the Farrow Entryway Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
FARROW ENTRYWAY CABINET NOTE: Make sure brackets of side panels are positioned towards each other as shown leg right side panel partition NOTE: Do not over tighten the bolts B bottom panel A left side panel A 1 Place bottom panel onto a clean, padded surface. Attach 4 legs to bottom panel with 2 large bolts, 2 spring washers and 2 large flat washers per leg as shown. Secure, but do not over tighten, bolts using an allen wrench.
PAGE 3
FARROW ENTRYWAY CABINET A A B adjustable shelf back panel 5 Attach back panel to assembled unit with 16 small screws as shown, using a screwdriver. 6 A) Insert 16 shelf pins at desired shelf heights. B) Place 4 adjustable shelves into assembly as shown. Make sure that each shelf securely supported by each shelf pin. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
FARROW ENTRYWAY CABINET SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 2 wall brackets to back of unit using 4 small screws as shown. B) Determine the final location of unit.