Assembly Instruction

FARROW MEDIA GAMING TOWER
Made in Vietnam - r02 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential to
use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach 2 wall brackets to back of unit using 4 small screws as
shown.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below each wall bracket mounted to the back of the
unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor.
Gently tap the plastic anchor until the flange of the anchor is flush
with the wall.
D) Attach wall brackets to the wall by inserting 2 large screws
through each bracket and each plastic anchor in the wall.
E) Place the unit so the wall brackets on the back edge are aligned
with the wall brackets on the wall.
F) Lace one end of the wall straps through each bracket, and into
the other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
SAFETY MOUNTING INSTRUCTIONS:
NOTE:
If you are unsure about your wall type
or what mounting method you should
use, consult a qualified professional
or your local hardware store.
A
C
small
screw
wall
bracket
plastic
anchor
large
screw
wall
strap
D
F
wall
bracket
WALL
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.