Assembly Instruction

FARROW MEDIA GAMING TOWER
Made in Vietnam - r02 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
7 With the assistance of another adult, position unit
upright. Attach back panel to assembled unit with 22
small screws as shown.
8 Attach 2 hinges to door front with 2 small screws
per hinge as shown. Secure, but do not over tighten,
screws with a phillips head screwdriver.
5 A) Fit pre-installed dowels of left and right side panels
into corresponding holes of top panel. Secure top panel
with 4 small bolts, 4 spring washers and 4 small flat
washers using a phillips head screwdriver. Do not over
tighten the screws.
B) Fit pre-installed dowels of left and right side panels into
corresponding holes of bottom panel. Secure bottom
panel with 4 large screws as shown.
A
B
bottom
panel
top
panel
NOTE: Do not over
tighten the screws
A
B
front
frame
6 Fit pre-installed dowels of assembled unit into
corresponding holes of front frame. Using a phillips
head screwdriver, turn cams clockwise until each cam
securely engages each cam screw.
back panel
door front