Assembly Instruction

FARROW 52” MEDIA CONSOLE

Made in Vietnam - r02 Page 2 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 Place bottom panel onto a clean, padded surface.

Attach 4 feet to bottom panel with 2 large bolts, 2

spring washers and 2 large flat washers per foot as

shown. Secure, but do not over tighten, bolts using an

allen wrench.

2 A) With assistance of another adult, position bottom

panel as shown. Attach left and right side panels to

bottom panel with 3 large screws per side as shown.

Secure, but do not over tighten, screws using a phillips

head screwdriver.

B) Attach partition to bottom panel with 2 large screws

as shown.

3 Fit pre-assembled dowels of left/right side panels

and partition into corresponding holes of top panel.

Attach top panel to left/right side panels and partition

with 6 small bolts, 6 spring washers and 6 small flat

washers as shown, using a screwdriver.

4 With the assistance of another adult, position

assembled unit upright. Attach front frame to assembled

unit with 12 small bolts, 12 spring washers and 12

small flat washers as shown, using a screwdriver.

NOTE: Do not over

tighten the bolts

bottom

panel

foot

left side

panel

partition

right side

panel

top

panel

NOTE: Make sure front

crossbars of side panels

are positioned towards

each other as shown

NOTE: Make sure crossbar

of top panel is positioned

towards the front of assembly

as shown.

front frame