Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Farrow 52" Media Console

COMPONENTS

Made in Vietnam - r02 Page 1 of 4

Thank you for purchasing the Farrow 52” Media Con-

sole. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

FARROW 52” MEDIA CONSOLE

2 - door fronts

1 - top panel 1 - front frame

1 - partition

2 - side panels

(1 left, 1 right)

1 - back panel

2 - adjustable

shelves

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

26 - spring

washers

18 - small

flat washers

8 - shelf

pins

phillips head screwdriver

1 - bottom

panel

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

(We recommened the use of hand tools instead power tools)

allen wrench (included)

WALL MOUNTING HARDWARE

4 - feet

8 - large

flat washers

18 - small

screws

18 - small

bolts

8 - large

screws

8 - large

bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
FARROW 52” MEDIA CONSOLE Missing hardware? Please call 800.606.6387 for replacements. ASSEMBLY HARDWARE 26 - spring washers 18 - small screws 18 - small flat washers 8 - large screws 8 - large flat washers 8 - shelf pins 18 - small bolts 8 - large bolts WALL MOUNTING HARDWARE Thank you for purchasing the Farrow 52” Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
FARROW 52” MEDIA CONSOLE NOTE: Make sure front crossbars of side panels are positioned towards each other as shown foot right side panel partition NOTE: Do not over tighten the bolts B bottom panel 1 Place bottom panel onto a clean, padded surface. Attach 4 feet to bottom panel with 2 large bolts, 2 spring washers and 2 large flat washers per foot as shown. Secure, but do not over tighten, bolts using an allen wrench.
PAGE 3
FARROW 52” MEDIA CONSOLE A A B adjustable shelf back panel 5 Attach back panel to assembled unit with 18 small screws as shown, using a screwdriver. LOCKED POSITION 6 A) Insert 8 shelf pins at desired shelf heights. B) Place 2 adjustable shelves into assembly as shown. Make sure that each shelf securely supported by each shelf pin. UNLOCKED POSITION CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
FARROW 52” MEDIA CONSOLE SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 2 wall brackets to back of unit using 4 small screws as shown. B) Determine the final location of unit.