Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Farrow 44" Corner Media Stand

COMPONENTS

Made in Vietnam - r03 Page 1 of 4

Thank you for purchasing the Farrow 44” Corner Media

Console. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

FARROW 44” CORNER MEDIA CONSOLE

2 - door fronts

1 - top panel 1 - front frame

2 - side panels

(1 left, 1 right)

1 - partition

1 - back

panel

2 - adjustable

shelves

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

30 - spring

washers

22 - small

flat washers

8 - shelf

pins

phillips head screwdriver

1 - bottom

panel

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

(We recommened the use of hand tools instead power tools)

allen wrench (included)

WALL MOUNTING HARDWARE

4 - legs

8 - large

flat washers

14 - small

screws

22 - small

bolts

12 - large

screws

8 - large

bolts

1 - bottom

crossbar

2 - side back panels

(1 left, 1 right)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
FARROW 44” CORNER MEDIA CONSOLE ASSEMBLY HARDWARE 30 - spring washers 22 - small flat washers 14 - small screws 12 - large screws Missing hardware? Please call 800.606.6387 for replacements. 8 - large flat washers 8 - shelf pins 22 - small bolts 8 - large bolts WALL MOUNTING HARDWARE Thank you for purchasing the Farrow 44” Corner Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
FARROW 44” CORNER MEDIA CONSOLE A leg NOTE: Do not over tighten the bolts right back panel A right panel partition bottom panel B B C left panel bottom crossbar 1 A) Place bottom panel onto a clean, padded surface. Attach 4 legs to bottom panel with 2 large bolts, 2 spring washers and 2 large flat washers per leg as shown. Secure, but do not over tighten, bolts using an allen wrench.
PAGE 3
FARROW 44” CORNER MEDIA CONSOLE A A B adjustable shelf back panel 5 Attach back panel to assembled unit with 14 small screws as shown, using a screwdriver. 6 A) Insert 8 shelf pins at desired shelf heights. B) Place 2 adjustable shelves into assembly as shown. Make sure that each shelf securely supported by each shelf pin. LOCKED POSITION CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
FARROW 44” CORNER MEDIA CONSOLE SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 2 wall brackets to back of unit using 4 small screws as shown. B) Determine the final location of unit.