Assembly Instruction

A
EXTENSION LEAF INSTALLATION
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is
finished with a protective clear lacquer.
Made in Vietnam - r05 Page 2 of 2
2 A) Locate the 2 metal clasps on the underside of the tabletop. Turn each clasp counter clockwise to unlock
as shown.
B) With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning metal
pins on leaf with matching locator holes. Push both tabletops towards the center.
ESSEX EXTENSION DINING TABLE
3 Re-latch clasps on underside of tabletop to the
leaf. Installation of the leaf is now complete.
OFF
ON
EXTENSION LEAF STORAGE
4 Remove leaf by unlocking clasps as shown. With the
tabletop fully extended, turn leaf 90º and place on
storage slats. Fit pins of leaf into corresponding holes of
tabletop as shown. Close tabletop sections and re-latch the
2 locking clasps. Extension leaf storage is now complete.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: When storing the leaf into the extension table, make sure
the side of the leaf without pins is flush to the side of the tray to
allow proper closing of the table.