Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Ellis Six-Drawer Dresser

HARDWARE

TOOLS REQUIRED

COMPONENTS

Customer Service 800.967.6696 | www.crateandbarrel.com

Made in Vietnam R05 Page 1 of 4

Thank you for purchasing the Ellis 6 Drawer Dresser.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

ELLIS 6 DRAWER DRESSER

Missing hardware?

Please call 800.606.6387 for replacements.

26 - flat

washers

26 - bolts

48 - screws

1 - back panel

6 - drawer

right side panels

6 - drawer

left side panels

1 - top panel1 - front frame

6 - drawer

bottom panels

6 - drawer

back panels

26 - spring

washers

1 - middle panel 6 - drawer

front panels

1 - support leg

1 - left

side panel

1 - right

side panel

Phillips head screwdriver

Summary of content (4 pages)

PAGE 1
ELLIS 6 DRAWER DRESSER HARDWARE 48 - screws 26 - bolts 26 - spring washers Thank you for purchasing the Ellis 6 Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 26 - flat washers Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
ELLIS 6 DRAWER DRESSER Make sure the wheels face towards the front. A 90º B B A 1 With the assistance of another adult, carefully lay back panel on padded surface. Fit left side panel, right side panel and middle panel onto back panel by aligning pre-assembled dowels with corresponding holes. Secure with 8 bolts, 8 spring washers, and 8 flat washers using a Phillips head screwdriver. NOTE: To remove screws, turn Phillips head screwdriver counterclockwise.
PAGE 3
ELLIS 6 DRAWER DRESSER Make sure the wheels of the drawer slides face out and towards the back NOTE: Do not over tighten the screws. VIEW FROM BELOW 5 Carefully place assembled unit upright. Fit top panel onto assembled unit by aligning dowels with corresponding holes. Secure top panel with 12 bolts, 12 spring washers, and 12 flat washers using a Phillips head screwdriver. 7 Slide drawer bottom panel into the groove at the base of drawer assembly.
PAGE 4
ELLIS 6 DRAWER DRESSER 8 Insert 6 drawer assemblies into the case, fitting wheels of drawer glide into rail of case glides. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in Vietnam R05 Customer Service 800.967.6696 | www.crateandbarrel.