Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ELLIS HUTCH
Made in China - r06
Page 2 of 3
2 A. With the assistance of another adult, place back
frame face up and position case assembly as shown. Insert
8 large bolts, 8 split washers and 8 washers through the
inside of side frames and secure each with a phillips head
screwdriver.
B. Fasten bottom panel to back panel with 4 long wood
screws. Secure with a phillips head screwdriver.
4 A. Insert 4 shelf pins per shelf at desired shelf height. Fit
2 shelves into the hutch assembly at an angle and place on
the shelf pins. Make sure each shelf is firmly supported by
the shelf pins.
B. Attach 1 door pull to each door with 3 short wood
screws. Secure each screw with a screwdriver.
5 With the assistance of another adult, place the assembled
hutch on top of the assembled buffet. Secure both units
together with 2 metal brackets and 4 short wood screws as
shown. Assembly is now complete.
3 With the assistance of another adult, place case assembly
upright. Position top panel over corresponding holes in the
case assembly. Insert 8 small bolts, 8 split washers and 8
washers and secure each with a phillips head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
x 2
x 2
x 8
x 8
x 4
A
B
A
View from below