Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Customer Service 800.967.6696 | www.crateandbarrel.com

Made in Vietnam r04 Page 1 of 3

Thank you for purchasing the Ellis Four Drawer Chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ELLIS FOUR DRAWER CHEST

Missing hardware?

Please call 800.606.6387 for replacements.

26 - flat

washers

26 - bolts

32 - screws

1 - back panel

4 - drawer

right side panels

4 - drawer

left side panels

1 - left side

panel

1 - right side

panel

1 - top panel1 - front frame

4 - drawer

front panels

4 - drawer

bottom panels

4 - drawer

back panels

26 - spring

washers

Phillips head screwdriver

PAGE 1
ELLIS FOUR DRAWER CHEST HARDWARE 26 - bolts 32 - screws 26 - flat washers 26 - spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Ellis Four Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ELLIS FOUR DRAWER CHEST Make sure the wheels face towards the front. NOTE: Do not over tighten the bolts. 1 With the assistance of another adult, carefully lay back panel on padded surface. Fit left and right side panel onto back panel by aligning pre-assembled dowels with corresponding holes. Secure with 8 bolts, 8 spring washers, and 8 flat washers, using a Phillips head screwdriver but do not over tighten. 2 Carefully fit front frame onto assembled unit by aligning dowels with corresponding holes.
PAGE 3
ELLIS FOUR DRAWER CHEST 5 Slide drawer bottom panel into the groove at the base of the assembly. 6 Attach the drawer right side panel to the assembly with 4 screws. Secure with a Philllps head screwdriver. Repeat steps 4-6 for each drawer assembly. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.