Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ELLIS BUFFET
Made in China - r05
Page 3 of 4
5 A. Insert 8 shelf pins into holes corresponding to your
desired shelf height.
B. Fit 2 adjustable shelves into the case by angling each
into position. Make sure each shelf is firmly seated on the
shelf pins.
6 A. Attach 2 drawer sides to drawer back with 2 medium
wood screws on either side. Do not over tighten screws.
B. Fit drawer bottom into slot at bottom of drawer sides
and back.
C. Fit drawer front onto front of assembly and secure with 2
medium wood screws on each side. Repeat Steps A-C for
the remaining drawer.
7 A. Fit drawers into case, aligning grooves in drawer sides
with rails on case interior.
B. Insert 2 drawer stop pins into holes at the rear of each
drawer assembly as shown.
Assembly is now complete.
x 8
x 2
x 4
A
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
C
Make sure this hole
is at the back of
the side panel