Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Ellis Buffet

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ELLIS BUFFET

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China - r05

Page 1 of 4

30 - washers

2 - door pulls 4 - drawer stop pins

2 - long

wood screws

1 - back panel

1 - front panel

Missing hardware? Please call 800.606.6387 for

replacements.

Thank you for purchasing the Ellis Buffet. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

2 - drawer fronts 2 - drawer backs

30 - split washers 30 - bolts

1 - right

side panel

1 - left

side panel

2 - drawer bottoms

1 - top panel

2 - adjustable

shelves

2 - lower

shelves

4 - drawer sides

(2 left, 2 right)

1 - divder

panel

16 - medium

wood screws

8 - shelf pins

6 - short

wood screws

Summary of content (4 pages)

PAGE 1
ELLIS BUFFET HARDWARE 30 - washers 6 - short wood screws Thank you for purchasing the Ellis Buffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ELLIS BUFFET NOTE: Do not overtighten the bolts. x6 x8 A B B 1 With the assistance of another adult, position 2 side panels and 1 divider panel as shown. Attach 2 lower shelves to the panels with 8 bolts, 8 split washers and 8 washers. Fully tighten each bolt with a phillips head screwdriver. 2 A. Position front panel on floor face down as shown. Align corresponding holes in side panels and divider panel with front panel.
PAGE 3
ELLIS BUFFET x8 Make sure this hole is at the back of the side panel A B C x2 5 A. Insert 8 shelf pins into holes corresponding to your desired shelf height. B. Fit 2 adjustable shelves into the case by angling each into position. Make sure each shelf is firmly seated on the shelf pins. 6 A. Attach 2 drawer sides to drawer back with 2 medium wood screws on either side. Do not over tighten screws. B. Fit drawer bottom into slot at bottom of drawer sides and back. C.
PAGE 4
ELLIS BUFFET ADJUSTING THE LEVELERS If the doors do not appear square or aligned, first try adjusting the levelers on the bottom of each leg. ADJUSTING THE HINGES If the doors still do not appear aligned after adjusting the levelers, loosen or tighten the appropriate screws on each case hinge as illustrated. A Adjusts door forward or backward B Adjusts door right or left C Adjusts door up or down C A B Made in China - r05 Page 4 of 4 Customer Service 800-967-6696 | http://www.crateandbarrel.