Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
5 Turn assembly back over. Fit short kickplate onto cam
screws as shown. Secure by turning both cams clockwise
with a screwdriver until the cam securely engages the cam
screw.
ELEMENTS BOOKCASE - LEFT FACING
Page 2 of 3
Made in China - r03
2 A. Insert 2 cams into the large holes on the long
kickplate. Make sure arrow on each cam points towards
nearest edge with holes.
B. Insert 2 cam screws into the smaller holes of the long
kickplate and secure with a screwdriver.
C. Insert 4 cams into the short kickplate, making sure
each arrow points to the nearest edge with holes.
3 With the assistance of another adult, align holes in the
upright panel (panel without cam screws) with holes in the
side of each shelf and top shelf. Attach each shelf with 2
bolts, fully tightening each bolt with the allen wrench.
4 With the assistance of another adult, turn shelf
assembly over. Attach remaining upright panel (panel
with cam screws) with 12 bolts, fully tightening each bolt
with the allen wrench. Make sure the cam screws face
down.
A
B
C
Cam in
unlocked
position
Cam in
locked
position
Top shelf with
holes facing down