Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ELEMENTS BOOKCASE - LEFT FACING
Page 3 of 3
Made in China - r03
7 A. Attach 4 feet to the bottom of the assembly as shown,
gently tapping into place with a hammer.
B. Conceal all exposed bolt heads by inserting plastic caps.
Assembly is now complete.
6 Fit cam screws of long kickplate into short kickplate
and upright panel. Secure all 4 cams by turning each
clockwise with a screwdriver.
OPTIONAL WALL ATTACHMENT
No wall anchor hardware is included with this unit.
For safe installation it is essential to use anchor
hardware appropriate for your wall type. Mount to
wood wall studs whenever possible. If you are unsure
of what type of fasteners to use, consult your local
hardware store or a qualified professional. This
product is only deterrent, it is not a substitute for
proper adult supervision.
Locate the pilot hole on the back of the shelf as
shown.
A. Attach 1 metal bracket with 1 screw to the shelf.
B. With the assistance of another adult, place
bookcase in desired location against the wall. Mark
wall directly opposite of pilot hole in shelf.
C. Attach 1 metal bracket to the wall at the mark.
Secure with 1 wall anchor (not included), preferably
into a wall stud. If not attaching to a stud, be sure to
use hardware appropriate to your wall type (drywall,
masonry, etc).
D. Place bookcase back into position against the
wall. Thread the end of the wall strap through each
bracket and into the notched end of the strap. Pull
until tight.
Pilot hole
Hole in Wall
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive
cleaners.