Assembly Instruction

Customer Service 800.967.6696 | www.crateandbarrel.com
ELEMENTS MEDIA TOWER
Made in China - r06 Page 5 of 5
A
12 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting,
it is essential to use wall anchors appropriate to your wall
type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A) Attach wall bracket to top center of media tower
using 1 cabinet screw. Secure screw with a screwdriver.
B) Determine the final location of cabinet. Mark position
on the wall, approximately 2" below the wall bracket
mounted to the back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach remaining wall bracket to the wall by inserting
1 wall screw through the wall bracket and into the wall
anchor in the wall. Secure screw with a phillips head
screwdriver.
E) Place the unit so the wall bracket on the back edge is
aligned with the wall bracket.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
C
D
F
cabinet
screw
wall
bracket
plastic
anchor
wall
screw
wall
strap
NOTE: If you are unsure about
your wall type or what mounting
method you should use, consult a
qualified professional or your
local hardware store.
WALL