Assembly Instruction

ELEMENTS MEDIA STAND
Made in China - r08 Page 4 of 6
9 A) Attach 2 drawer glides to bottom panel with 3
small screws per glide. Secure screws with a
screwdriver.
B) Attach 4 supports to bottom panel with 1 small
screw per support as shown.
10 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown.
Attach bottom panel to assembled unit with 10 bolts.
Secure bolts with an allen wrench.
bottom
panel
drawer
glide
support
C
left and right
drawer sides
drawer
back
bottom
panel
bottom
frame
A
A
B
drawer
back
B
D
Customer Service 800.967.6696 | www.crateandbarrel.com
11 A) Attach bottom frame to assembled unit with 12
large screws as shown. Secure screws with a
screwdriver.
B) Gently tap 6 feet into bottom of assembled unit
with a hammer as shown.
12 A) Insert 2 small cam screws into left and right drawer
sides as shown.
B) Insert 4 small cams into drawer back as shown.
C) Insert 2 small wood dowels into drawer back as shown.
D) Fit cam screws of left and right drawer side into
corresponding holes of drawer back as shown. Secure 4 cams.