Assembly Instruction

ELEMENTS MEDIA CART
Page 4 of 4
Made in China - r08
12 Cover all exposed cams by inserting a cam cover into
each cam.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
10 Attach the casters to the assembly with 4 screws
per caster. Put the 2 casters with brakes along the long
edge for easy accessibility. Secure each screw with the
allen wrench, but do not over tighten.
Casters
with brakes
11 With the assistance of another adult, turn the
assembly into an upright position. Align slots of each
center support with installed wire supports. Slide each
center support onto each corresponding wire support.
Customer Service 800.967.6696 | www.crateandbarrel.com