Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Elements Large Media Cart

HARDWARE

1 Insert 4 wood dowels into holes in the edges of each

narrow upright. Insert 4 wood dowels into the outer holes

on each wide upright edge.

Thank you for purchasing the Elements Media

Cart. This page lists all the contents included in

the box. Please take time to identify the

hardware as well as the individual components of

this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect

them from damage.

Note: 2 people are required to safely assemble

this product.

COMPONENTS

8 - narrow

uprights

4 - wide

uprights

1 - top panel

(holes only on

1 side)

1 - center panel

TOOLS REQUIRED

Allen Wrench (included)

Phillips Head Screwdriver

1 - bottom panel

(holes for casters

on underside)

2 - casters

with brakes

48 - wood

dowels

2 - center

supports

ELEMENTS MEDIA CART

Page 1 of 4

Made in China - r08

Missing hardware? Please call 800.606.6387 for replacements.

16 - screws

24 - cams

24 - cam

screws

24 - cam

covers

4 - wire

supports

Narrow Upright

Wide Upright

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
ELEMENTS MEDIA CART HARDWARE 48 - wood dowels 24 - cams 2 - casters Thank you for purchasing the Elements Media Cart. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ELEMENTS MEDIA CART Top panel (upside down) Wide Upright 2 Insert 6 cams into each wide upright as shown. Make sure that the arrow on each cam points towards the closest edge. 3 Attach 6 cam screws to the underside of the top panel with a phillips head screwdriver. Do not over tighten screws. A B 4 A. Fit 2 wide uprights and into position, aligning dowels and cam screws with corresponding holes in top panel. Make sure the cams on the wide uprights face inward. B.
PAGE 3
ELEMENTS MEDIA CART A Cam in unlocked position B Cam in locked position 6 Secure both wide uprights to top panel by locking all 6 lower cams with a phillips head screwdriver. Turn all cams clockwise as illustrated until cam firmly engages the cam screw. Center panel (upside down) 7 A. Insert 12 cam screws into the top and bottom of the center panel as indicated. B. Insert 2 wire supports at desired location on top and bottom of center panel. Make sure wire supports are aligned with one another.
PAGE 4
ELEMENTS MEDIA CART Casters with brakes 10 Attach the casters to the assembly with 4 screws per caster. Put the 2 casters with brakes along the long edge for easy accessibility. Secure each screw with the allen wrench, but do not over tighten. 11 With the assistance of another adult, turn the assembly into an upright position. Align slots of each center support with installed wire supports. Slide each center support onto each corresponding wire support.