Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Duplex Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 4 barrel nuts into support panel as shown.

With a screwdriver, align each nut so the threaded holes

are orientated as shown.

B) Attach left and right side panels to support panel

with 2 large bolts per side as shown. Secure, but do not

over tighten, bolts using an allen wrench.

ASSEMBLY

allen wrench

(included)

phillips head screwdriver

Made in China - r02 Page 1 of 2

Thank you for purchasing the Duplex Table. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DUPLEX TABLE

Missing hardware? Please call 800.606.6387 for replacements.

1 - side panel

(1 right, 1 left)

4 - wood

plug

4 - large

bolts

1 - top panel

4 - small

bolts

4 - barrel

nuts

1 - support panel

support panel

right side

panel

left side

panel

NOTE: Do not over

tighten the bolts

Make sure threaded

holes are aligned

vertically

VIEW FROM BELOW

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

Summary of content (2 pages)

PAGE 1
DUPLEX TABLE HARDWARE 4 - small bolts 4 - large bolts 4 - barrel nuts 4 - wood plug Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Duplex Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DUPLEX TABLE wood plug CLEANING & CARE A wood block top panel B Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat and water. 2 A) With the assistance of another adult, carefully place top panel onto clean, padded surface. Fit assembled unit onto corresponding wood blocks on top panel as shown.