Assembly Instruction

Made in Taiwan - r02
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
DROP LEAF KITCHEN TABLE
Page 2 of 2
2 Attach 2 legs (A) to corresponding label
on tabletop with 3 small bolts as shown.
Secure, but do not over tighten, bolts with
an allen wrench.
Repeat steps for legs (B).
3 Attach support frame to leg assembly with 8
small bolts as shown. Make sure label on support rail
is facing the bottom of assembly. With the assistance
of another adult, position unit upright.
Assembly is now complete.
leg
(A)
A
A
B
B
leg
(A)
leg
(B)
leg
(B)
support
frame
To extend leaf, lift leaf to a horizontal position and pull
out support frame. Make sure leaf is securely supported
by frame. If desired, repeat steps for remaining leaf.
Make sure to extend each leaf separately.
To release leaf, hold leaf steady and push support
frame into tabletop. Carefully, drop leaf into 90º
position. If desired, repeat steps for remaining leaf.
Make sure to release each leaf separately.
support
frame
support
frame
90º
90º
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
DROP LEAF
EXTEND LEAF