Assembly Instruction

Made in China - r01 Page 1 of 2

Thank you for purchasing the Drake Lateral File

Cabinet. This page

lists all the contents included in the

box. Please take the time

to identify the hardware as

well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

HARDWARE

COMPONENTS

DRAKE LATERAL FILE CABINET

8 - bolts 8 - spring

washers

8 - flat

washers

4 - screws 2 - pulls 2 - file

rails

4 - rubber

bumpers

phillips head screwdriver

allen wrench (included)

1 - left side frame

1 - cabinet assembly

1 - glass top

1 - crossbar

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - right side frame

PAGE 1
DRAKE LATERAL FILE CABINET HARDWARE 8 - bolts 8 - spring washers 8 - flat washers 4 - screws 2 - pulls 2 - file rails 4 - rubber bumpers Thank you for purchasing the Drake Lateral File Cabinet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Missing hardware? Please call 800.606.
PAGE 2
DRAKE LATERAL FILE CABINET C bolt left side frame D spring washer flat washer A right side frame 1 A) Place right side frame onto a clean, padded surface, and pull drawers of cabinet assembly out as shown. Attach cabinet assembly onto right side frame with 4 bolts, 4 spring washers, and 4 flat washers as shown. Secure bolts with an allen wrench. B cabinet assembly B) Fit dowels of crossbar into corresponding holes of right side panel.