Assembly Instruction

Made in China - r04 Page 2 of 2
DRAKE DESK
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.
2 A) With assistance of another adult, fit dowels of left
side panel into desktop as shown. Secure with 3
bolts, 3 spring washers and 3 flat washers, using an
allen wrench. Do not over tighten the bolts.
B) Fit dowel of crossbar into left side panel as shown.
Using a screwdriver, turn cam clockwise until it
securely engages cam screw.
3 A) Fit dowels of right side panel into desktop as
shown. Secure with 3 bolts, 3 spring washers and 3
flat washers, using an allen wrench.
B) Fit dowel of crossbar into right side panel as
shown. Secure cam.
4 Attach 2 metal braces to desk assembly as shown
with 3 screws. Secure, but do not over tighten, with a
screwdriver. With the assistance of another adult,
position unit upright.
5 A) Adhere 4 pads to each corner of desk assembly
as shown.
B) With the assistance of another adult, carefully place
glass top onto desk assembly. Make sure glass top is
securely supported by pads.
Assembly is now complete.
A
B
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
B
A
B
A
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screws
Make sure
hole on
crossbar is
facing up
during
assembly