Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 2 cams and 2 wood dowels into crossbar as

shown. Make sure arrows on each cam points toward

nearest edge with holes.

B) Insert 1 cam screw and 2 wood dowels into left and

right side panels. Secure cam screws, but do not over

tighten, with a phillips head screwdriver.

Made in China - r04 Page 1 of 2

Thank you for purchasing the Drake Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DRAKE DESK

Missing hardware? Please call 800.606.6387 for replacements.

6 - wood

dowels

3 - screws

NOTE: Do not over

tighten the cam screw

2 - side frames

(1 left, 1 right)

6 - bolts 2 - cam

screws

4 - pads 6 - flat

washers

6 - spring

washers

2 - cams

1 - crossbar

1 - desktop

assembly

1 - glass

panel

2 - metal

braces

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

PAGE 1
DRAKE DESK HARDWARE 6 - wood dowels 3 - screws 6 - bolts 2 - cam screws 4 - pads 6 - flat washers 6 - spring washers 2 - cams Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Drake Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DRAKE DESK A NOTE: Do not over tighten the bolts A Make sure hole on crossbar is facing up during assembly B A B B 2 A) With assistance of another adult, fit dowels of left side panel into desktop as shown. Secure with 3 bolts, 3 spring washers and 3 flat washers, using an allen wrench. Do not over tighten the bolts. B) Fit dowel of crossbar into left side panel as shown. Using a screwdriver, turn cam clockwise until it securely engages cam screw.