Assembly Instruction

Made in China - r01 Page 2 of 3
DRAKE
BOOKCASE
A. Insert 1 cam into the bottom of each crossbar as
shown. Make sure arrow on cam points towards the
closest end with the dowel.
B. Fit 5 crossbars onto the right side frame, aligning
cam screws and dowels with corresponding holes.
1
A. Insert 1 cam in the other end of each crossbar.
Make sure arrow on each cam points towards the end
of the crossbar.
B. Fit left side frame onto dowels of crossbars.
C. Turn all 10 cams clockwise using a Philip head
screwdriver to secure side frames to crossbars.
2
3
4
Assemble the 2 metal cross braces, located in
packing foam with red ribbon. Using an allen wrench,
fasten 1 allen bolt to center of cross brace.
Insert 10 cam screws into both side frames. Secure
each with a phillips head screwdriver but do not over
tighten.
A
B
Arrow on cam
points
towards end
A
B
C
Make sure
these holes
face up
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com