Assembly Instruction

DRAKE BOOKCASE

Made in China - r01 Page 1 of 3

Thank you for purchasing the Drake Bookcase. This page

lists all the contents included in the box. Please take the time

to identify the hardware as well as the individual components

to this product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - left side frame 1 - right side frame

5 - glass panels

5 - crossbars

2 - metal cross braces

4 - small

screws

20 - rubber

pads

10 - cam

screws

10 - cams 1 - allen bolt

Allen wrench (included) Phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
DRAKE BOOKCASE HARDWARE 10 - cam screws 4 - small screws 10 - cams 1 - allen bolt 20 - rubber pads Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Drake Bookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DRAKE BOOKCASE Arrow on cam points towards end A Make sure these holes face up B 1 Insert 10 cam screws into both side frames. Secure each with a phillips head screwdriver but do not over tighten. 2 A. Insert 1 cam into the bottom of each crossbar as shown. Make sure arrow on cam points towards the closest end with the dowel. B. Fit 5 crossbars onto the right side frame, aligning cam screws and dowels with corresponding holes. C B A 3 A. Insert 1 cam in the other end of each crossbar.
PAGE 3
DRAKE 5 BOOKCASE With assistance of another adult, turn assembly upright. Attach metal cross brace assembly to back of the bookshelf by fastening 4 small screws into predrilled holes in the frame with a phillips head screwdriver. 6 Adhere 20 small rubber pads to the frames, as illustrated above. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Use glass cleaner on shelves as necessary. Do not use abrasive cleaners. 7 Carefully place 5 glass panels on shelves. Assembly is now complete.