Assembly Instruction

Made in China - r06 Page 2 of 3
3 A) Fit dowels of left and right leg into corresponding
holes of assembled unit. Secure all cams.
B) Secure left and right legs of assembled unit with 4
large bolts, 4 spring washers and 4 flat washers as
shown, using an allen wrench. Do not over tighten the
bolts.
DRAKE MEDIA STAND
2 A) With the assistance of another adult, fit dowels of
left and right leg into corresponding holes of media
stand assembly as shown.
B) Fit dowels of left and right leg into corresponding
holes of crossbars. With a screwdriver, turn cams
clockwise until they securely engage each cam screw.
media stand
assembly
crossbar
left leg
right leg
crossbar
NOTE: Do not over
tighten the bolts
left leg
right leg
4 A) Attach adjustable leg to assembled unit by turning
leg clockwise to secure. If your table is not level after
assembly is complete, with the assistance of another
adult, adjust leveler of adjustable leg as neccessary.
B) Attach tabletop frame to assembled unit with 4
medium bolts as shown, using an allen wrench.
tabletop
assembly
adjustable
leg
5 A) With the assistance of another adult, position unit
upright. Attach 2 pulls to assembled unit as shown and
secure each pull with 2 small bolts.
B) Adhere 6 pads to tabletop frame as shown and carefully
place glass tabletop onto tabletop frame.
Assembly is now complete.
glass
tabletop
pull
pad
NOTE: Make sure
brackets of legs
face in as shown
adjustable
leg
leveler
A
B
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
A
B
A
B
B
A
INSTRUCTION FOR REMOVING DOOR: Lift door and release from bottom groove.
INSTRUCTION FOR INSERTING DOOR: Insert door into top groove and fit into bottom groove.