Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Drake 49" Media Console

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 2 wood dowels and 1 cam screw into left and

right legs as shown. Secure, but do not over tighten, using

a phillips head screwdriver.

B) Insert 2 cams into each crossbar as shown. Make sure

arrows on each cam point toward the nearest edge with

holes.

ASSEMBLY

Made in China - r06 Page 1 of 3

Thank you for purchasing the Drake Media Stand. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DRAKE MEDIA STAND

Missing hardware? Please call 800.606.6387 for replacements.

1 - tabletop

frame

4 - small

bolts

4 - medium

bolts

1 - media stand

assembly

1 - glass tabletop

1 - adjustable

leg

2 - crossbars 2 - left legs 2 - right legs

8 - flat

washers

8 - spring

washers

4 - cams

4 - cam

screws

8 - wood

dowels

8 - large

bolts

6 - pads

right leg

left leg

crossbar

Make sure arrows on

each cam point toward

nearest edge with holes

NOTE: Do not over

tighten the cam screws

2 - pulls

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - large

screw

2 - wall

brackets

1 - plastic

anchor

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

phillips head screwdriver

( We recommend the use of hand tools instead of power tools )

Summary of content (3 pages)

PAGE 1
DRAKE MEDIA STAND HARDWARE 4 - small bolts 4 - medium bolts 4 - cams 8 - flat washers 8 - large bolts 8 - wood dowels 8 - spring washers 4 - cam screws 6 - pads Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Drake Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DRAKE MEDIA STAND NOTE: Make sure brackets of legs face in as shown media stand assembly crossbar left leg right leg A crossbar right leg B A NOTE: Do not over tighten the bolts B left leg 2 A) With the assistance of another adult, fit dowels of left and right leg into corresponding holes of media stand assembly as shown. B) Fit dowels of left and right leg into corresponding holes of crossbars. With a screwdriver, turn cams clockwise until they securely engage each cam screw.
PAGE 3
DRAKE MEDIA STAND WALL C F D A OPTIONAL WALL MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 wall bracket to assembled unit as shown, using 1 small screw. B) Determine the final location of dresser unit.