Assembly Instruction

Page 4 of 4
DELAVAN
TWO DOOR CABINET
Made in Vietnam - r03 Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
7 Safety Mounting Instructions
For added safety and stability, it is recommended that
the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors appropriate
to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
A) Attach wall bracket to top of unit using 2 medium
screws as shown.
B) Determine the final location of unit. Mark position on
the wall, approximately 2" below the wall bracket
mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic
anchor until the flange of the anchor is flush with the
wall.
D) Attach wall bracket to the wall by inserting 2 large
screws, and into the plastic anchor in the wall.
E) Place the unit so the wall brackets on the back edge
are aligned with the wall brackets on the wall.
F) Lace one end of the wall strap through both
brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat steps A-G for remaining wall brackets and wall
straps.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type
or what mounting method you should
use, consult a qualified professional
or your local hardware store.
A
C
medium
screw
wall
bracket
plastic
anchor
large
screw
wall
strap
D
F
wall
bracket
WALL