Assembly Instruction

DELAVAN TWO DOOR CABINET
Page 2 of 4
2 A) Place front frame onto clean, padded surface as
shown. Fit dowels of partition into corresponding holes
of front frame as shown. Make sure partition is orientated
as shown during assembly.
B) Attach base assembly to front frame with 4 large
bolts, 4 spring washers and 4 flat washers as shown.
Secure, but do not over tighten, bolts with a phillips head
screwdriver.
3 A) Attach left and right side panels to front frame
with 4 small bolts, 4 spring washers and 4 flat wash-
ers per side panel. Make sure side panels are oriented
as shown during assembly.
B) Secure base frame to side panels with 4 large bolts,
4 spring washers and 4 flat washers as shown.
Made in Vietnam - r03 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 A) Attach top panel to front frame with 4 small bolts, 4
spring washers and 4 flat washers as shown.
B) Secure assembly to top panel with 6 small bolts, 6
spring washers and 6 flat washers as shown.
NOTE: Do not over
tighten the bolts
5 Attach back panel with 23 small screws, using a
screwdriver.
A
B
B
A
A
B
B
A
A
B
B